Command Line Options and Resources

Command-line Options

Mode Settings

PRINT and EXPORT

Fonts or Colors, etc.

Size of Windows, etc.

Other Settings

X Resources

Mode Resources

PRINT and EXPORT

Fonts or Colors, etc.

Size of Windows, etc.

Other Resources

Resources for Internationalization [I18N]

Command-line Options

xfig will accept the following command-line options. They may be specified such as `xfig -portrait -metric' when starting xfig.

It is also possible to use X resources instead of, or in addition to command-line options. There are also some xfig-related environment variables.

Mode Settings

-allow_neg_coords (-allow): Allow panning the canvas into the negative region. This is the default. Also, in this mode the user is not asked if he/she wants to shift the figure when reading in a file with objects that have negative coordinates.
-dont_allow_neg_coords (-dont_allow): Don't allow panning the canvas into the negative region. Also, when in this mode the user is asked if he/she wants to shift the figure when reading in a file with objects that have negative coordinates.
-dont_show_zero_lines (-dont_s): Don't draw the lines crossing through 0,0 on the canvas. The page border may still be drawn unless -dontshowpageborder is selected.
-hiddentext (-hi): Set the Hidden flag of TEXT FLAGS to ON. The default is off.
-inches (-inc, -imperial): Make inches the unit of choice. This is the default. See also the -metric option and Set Units.
-landscape (-lan): Start xfig in landscape (11inch x 8.5inch) mode. This is the default. See also the -portrait option.
It is also possible to change the orientation using the View/Portrait/Landscape menu entry after starting xfig. Fig files of version 3.0 and later contain the orientation information, and the mode will be changed as those files are loaded.
-latexfonts (-lat): Select LaTeX fonts to start. Normally, PostScript fonts are selected.
-metric (-me, -centimeters): Make centimeters the unit of choice. The default is inches. See also the -inches option and Set Units.
-portrait (-po): Start xfig in portrait (8.5inch x 9inch) mode. The default is landscape mode. See also the -landscape option.
-rigidtext (-rigi): Set the Rigid flag of TEXT FLAGS to ON. The default is off.
-rulerthick (-ru): Set the thickness of top and side rulers in pixels. The default (and minimum) is 24.
-specialtext (-spec): Set the Special flag of TEXT FLAGS to ON. The default is off.
-startfontsize pointsize (-startfo): Set the initial value of TEXT SIZE. The default is 12pt.
-startpsFont font (-startps): Select the initial PostScript font as TEXT FONT. The default is Times-Roman.
-startlatexFont font (-startla): Select the initial LaTeX font as TEXT FONT. This is effective only if -latexfonts option is given. The default is Default.
-starttextstep stepsize (-startt): Set the initial value of TEXT STEP. The default is 1.2.
-startfillstyle stylenumber (-startfi): Set the initial setting (-1 to 21) of FILL STYLE. The default is -1 (No fill).
-startgridmode modenumber (-startg): Set the initial GRID MODE. Mode 0 is None. When unit is inches, mode 1 1/8 inch, mode 2 is 1/4 inch, mode 3 is 1/2 inch, and mode 4 is 1 inch. When unit is centimeters, mode 1 2mm, mode 2 is 5mm, mode 3 is 1cm, and mode 4 is 2cm. The default is mode 0 (no grid).
-startposnmode modenumber (-startpo): Set the initial POINT POSITION. Mode 0 is Any. When unit is inches, mode 1 is 1/16 inch, mode 2 is 1/8 inch, mode 3 is 1/4 inch, mode 4 is 1/2 inch, and mode 5 is 1 inch. When unit is centimeters, mode 1 is 1mm, mode 2 is 2mm, mode 3 is 5mm, mode 4 is 1cm, and mode 5 is 2cm. The default is mode 1 (1/16inch or 1mm).
-startlinewidth width (-startli): Set the initial value of LINE WIDTH. The default is 1.
-update file [ file ... ] (-up): Run xfig in an ``update'' mode, where it will read each Fig file specified on the command line and write it out to the original file, in the current file format for the version of xfig being run. The original Fig file will be preserved with the suffix .bak attached to the name.
In this mode, xfig doesn't connect the X server, so no window is opened, and it exits when finished.
-userscale scale (-users): Set the multiplier used when displaying dimensions. See also Set Units.
-userunit units (-useru): Set the unit name used when displaying dimensions. See also Set Units.
-zoom zoomscale: Set the initial value of ZOOM SCALE. The default is 1.0.

PRINT and EXPORT Settings

-exportLanguage language (-exportL)

Set the initial export language when Exporting. Language may be one of the following:

Vector formats:
     box        LaTeX box (figure boundary)
     latex      LaTeX picture
     epic       LaTeX picture + epic macros
     eepic      LaTeX picture + eepic macros
     eepicemu   LaTeX picture + eepicemu macros
     pictex     PiCTeX macros
     ibmgl      IBMGL (or HPGL)
     eps        Encapsulated PostScript
     ps         PostScript
     pdf        Portable Document Format
     pstex      Combined PS/LaTeX (both PS and LaTeX parts)
     textyl     Textyl \special commands
     tpic       TPIC
     pic        PIC
     mf         MF (MetaFont)
     cgm        CGM (Computer MetaGraphics)
     tk         Tk (ala Tcl/Tk)
     map        HTML Image map
Bitmap formats:
     gif        GIF
     jpg        JPEG (JFIF)
     pcx        PCX
     png        PNG (Portable Network Graphics)
     ppm        PPM (Portable Pixmap)
     sld        AutoCAD Slide format
     tiff       TIFF (no compression)
     xbm        X11 Bitmap
     xpm        X11 Pixmap (XPM3 package)

The default is eps.

-export_margin (-export_m)

Set the size of the border margin around the figure for exporting to bitmap, PostScript, Encapsulated PostScript, or HTML MAP formats. This is in units of pixels (1/80th inch). The default is 0.

-center (-cente)

Select Center as Justification when Exporting or Printing. This the the default.

-flushleft (-flu)

Select Flush Left as Justification when Exporting or Printing. The default is Centered.

-magnification mag (-mag)

Set Magnification when Exporting or Printing. mag is magnification in %. The default is 100%.

-multiple (-mu)

Set Pages to Multiple when Exporting or Printing. The default is Single.

-single (-si)

Set Pages to Single when Exporting or Printing. This is the default.

-paper_size size (-pa)

Set the paper size when Exporting or Printing. size can be one of follows:

      Letter      8.5in x  11in
      Legal       8.5in x  14in
      Tabloid     17in x   11in
      ANSI A      8.5in x  11in
      ANSI B      11in x   17in
      ANSI C      17in x   22in
      ANSI D      22in x   34in
      ANSI E      34in x   44in
      ISO A9      37mm x   52mm
      ISO A8      52mm x   74mm
      ISO A7      74mm x  105mm
      ISO A6     105mm x  148mm
      ISO A5     148mm x  210mm
      ISO A4     210mm x  297mm
      ISO A3     297mm x  420mm
      ISO A2     420mm x  594mm
      ISO A1     594mm x  841mm
      ISO A0     841mm x 1189mm
      JIS B10     32mm x   45mm
      JIS B9      45mm x   64mm
      JIS B8      64mm x   91mm
      JIS B7      91mm x  128mm
      JIS B6     128mm x  182mm
      JIS B5     182mm x  257mm
      JIS B4     257mm x  364mm
      JIS B3     364mm x  515mm
      JIS B2     515mm x  728mm
      JIS B1     728mm x 1030mm
      JIS B0    1030mm x 1456mm

-jpeg_quality quality (-j)

Set the quality used when Exporting to the JPEG (JFIF) image format.

-transparent_color xfig color number (-tran)

Set the ``transparent'' color when Exporting to the GIF image format. This is one of the xfig colors, which are numbered from -3 (Background), -2 (None), -1 (Default), 0 (Black), 1 (Blue) etc. See Colors.

Setting of Fonts or Colors, etc.

-boldFont font (-bol): Set the font used to display file names or confirmation messages, etc. The default is 8x13bold.
-buttonFont font (-butt): Set the font used to display labels of most buttons. The default is 6x13.
-normalFont font (-nor): Set the font used in message windows, etc. This font will also be used on the canvas when the desired font is not available. The default is 6x13.
-scalablefonts (-sc): Allows use of the X11R5 or OpenWindows scalable fonts. This is the default. If the scalable fonts aren't available, xfig will automatically switch to non-scaling fonts.
-noscalablefonts (-nos): Disable use of the X11R5 or OpenWindows scalable fonts. You might want to use this for debugging.
-cbg color: Set the background color of the canvas. If you want to set the background color of everything in xfig (menus, etc), use the general -bg option.
-cfg color: Set the default color of objects. If you want to set the foreground color of everything in xfig (menus, etc), use the general -fg option.
-monochrome (-mo): Use black and white only for display.
-max_image_colors numcols (-max): Limit the number of colors used for imported images to numcols. The default is 64. Xfig uses a The Kohonen neural network to map the colors in imported pictures to the limited set available to it.
-dontswitchcmap (-dontsw): Normaly, xfig will switch to a private colormap when not enough colors are available in the default colormap, but this option will inhibit the switch. See also -max_image_colors.
-visual visualname: Use visualname as the visual. visualname is one of TrueColor, StaticColor, DirectColor, StaticGray, GrayScale, and PseudoColor. xfig uses the default visual unless this is specified.
Use the xdpyinfo command to see which visuals and depths are supported. See also -depth option.
-depth (-dep): Choose depth of visual desired.
Use xdpyinfo to see what visuals and depths are supported. See also -visual option.

Settings for the Size of Windows, etc.

-geometry [WxH]+x+y (-geom): Set the size and/or position of the xfig window. You may use this to set the size of the main xfig window, or you may instead set the size of the drawing canvas in inches or cm using the -pwidth and -pheight options.
-iconGeometry +x+y (-iconG): Set the position for the xfig icon on the display.
-pheight height (-ph): Set the height of the xfig canvas to height. height is either cm or inches, depending on the selected unit.
-pwidth width (-pw): Set the width of xfig canvas to width. width is either cm or inches, depending on the selected unit.
-but_per_row number (-but_): Specify how many buttons wide the mode panel should be. This is useful in conjunction with the -pheight option to reduce the canvas height for small screens. The default is 2, but xfig may automatically adjust this when xfig is invoked on small screen and it is not explicitly specified. Also, xfig may be compiled to use smaller icons for the mode panel.
-left (-le): Put the drawing and editing mode panel on the left side of the canvas. This is the default.
-right (-righ): Put the drawing and editing mode panel on the right of the canvas. The default is left.
-showallbuttons (-showa): Always show all the attribute buttons instead of only those relevant to the current drawing or editing mode. This takes up more screen real estate, but allows the user to see all settable parameters. Normally, each attribute button will only appear when it is relevant to the current drawing mode.
-internalBW width: Set the width of lines between all buttons and panels. The default is 2.

Other Settings

-help (-h): Print all command-line options for xfig and quit.
-debug (-deb): Turn on debugging mode. Print various debugging messages such as font names, etc.
-flipvisualhints (-fli): Flip left/right mouse indicator messages for mice whose buttons have been switched. The default is to not flip the messages.
-showdepthmanager (-showd)
-hidedepthmanager (-hide): Show or hide the depth manager This will allow more room for the canvas. The default is to show the depth manager.
-image_editor (-ima): Specify the program to be invoked when the Edit Image button on the Edit Panel for PICTURE object is clicked.
-library_dir (-li): Specify the directory where Fig object (drawing) directories are stored. See available libraries.
-showballoons (-showb)
-dontshowballoons (-dontshowb): Popup/don't popup balloon messages when the cursor passes over buttons etc. The default is to show the balloons.
-balloon_delay msec (-bal): Specify the delay time in milliseconds before the information balloons popup. The default is 500 milliseconds.
-pageborder color (-pag): Draw the page border on the canvas in this color (default light blue). The page border is turned on by the -showpageborder (resource Fig.showpageborder) option, and shows the edges of the current export paper size.
-showdepthmanager (-show_d): Show the depth manager to the right of the side ruler. This is the default.
-showlengths (-showl)
-dontshowlengths (-dontshowl): Makes xfig show the lengths of lines being drawn, in red text near the line itself. Also, when points are moved or added. In addition, imagine a triangle formed with the line segment being drawn as the hypotenuse, and a vertical and horizontal line forming the other two sides. These lines and their lengths are also drawn in red as the point is moved or added.
-shownums (-shown)
-dontshownums (-dontshown): Makes xfig show the number of each vertex of objects on the canvas. This is probably only useful for debugging of Fig files.
-showpageborder (-showp)
-dontshowpageborder (-dontshowp): Show or don't show the border of the current paper size in the color specified by the -pageborder option (default light blue).
-spellcheckcommand spell-check-command (-spel): Specify the external spell check program to use when checking spelling of text objects. The default is `spell'.
-spinner_delay msec (-spinner_d): Specify the delay time in milliseconds before a spinner counts automatically, while the up- or down-arrow is being pressed. The default is 500 milliseconds.
-spinner_rate msec (-spinner_r): Specify the rate in milliseconds at which a spinner counts automatically. The default is 100 milliseconds.
-tablet (-ta): Specifies that xfig should use the input tablet instead of the mouse for drawing. You must have the XInputExtension in your X server and an input tablet for this to work, and xfig must be compiled with the TABLIB and USETAB variables set in the Imakefile for it to use the tablet.
Use xdpyinfo to see if your server supports the XInputExtension.
-keyFile compose-key-file (-k): Use compose-key-file instead of CompKeyDB for compose key database. If there are no `/'s in the name, the file must reside in the xfig library directory $XFIGLIBDIR (normally /usr/local/lib/X11/xfig). If there are any `/'s in the name it is taken as is (not relative to $XFIGLIBDIR). If the name is start with `~/', it will replaced to the user's home directory.
-track (-trac)
-notrack (-not): Turn on or off cursor (mouse) tracking arrows. The default is to track the cursor position by displaying arrows on the top and side ruler.
-international: Turn on internationalization facility. Xfig must be compiled with the internationalization facility. Languages such as Japanese or Korean can't be used in international-xfig unless this option is specified when invoking xfig or the international resource is set to ON.
-inputStyle style: Set the input style when entering international text with input method. The style may be selected from OffTheSpot, OverTheSpot, and Root. If this is set to None, input method will not used. This is effective only if internationalization facility is enabled.

X Resources

Here are X resources which may be used to customize xfig. They are usually specified by putting lines into the resource database file of xfig, such as /usr/X11/lib/app-defaults/Fig or the user's own resource file which must be read by xrdb.

A note about xfig color resources:

Generally, the user should have a common resource `*customization: -color' set if they have a color display. This signals the X system (version 4 and later) to look for the XXX-color app-defaults file in the applications defaults directory. In that file (e.g. ``Fig-color'') the color definitions are used and it is responsible for including the main app-defaults file Fig.

Mode Resources

allow_neg_coords (NegativeCoordinates): Allow panning the canvas into the negative region. This is the default. If this is false the user is asked if he/she wants to shift the figure when reading in a file with objects that have negative coordinates.
Option: -allow_neg_coords, -dont_allow_neg_coords
Default: on
hiddentext (HiddenText): Set initial value of the Hidden flag of the TEXT FLAGS.
Option: -hiddentext
Default: off
inches (Inches): inches will be selected as the unit if this is set ON, cm otherwise.
Option: -inches (-imperial), -metric (-centimeters)
Default: on (inches)
landscape (Orientation): landscape orientation will be selected if this is set ON, portrait mode otherwise.
Option: -landscape, -portrait
Default: on (landscape)
latexfonts (Latexfonts): LaTeX fonts will be used initially if this is set ON. Otherwise PostScript fonts will be used.
Option: -latexfonts
Default: off
rigidtext (RigidText): Set initial value of the Rigid flag of the TEXT FLAGS.
Option: -rigidtext
Default: off
specialtext (SpecialText): Set initial value of the Special flag of the TEXT FLAGS.
Option: -specialtext
Default: off
startpsFont (StartpsFont): Select the specified PostScript font as the initial TEXT FONT.
Option: -startpsFont
Default: Times-Roman
startlatexFont (StartlatexFont): Select the specified LaTeX font as the initial TEXT FONT.
Option: -startlatexFont
Default: Default
startfontsize (StartFontSize): Set initial value of TEXT SIZE.
Option: -startfontsize
Default: 12
starttextstep (StartTextStep): Set initial value of TEXT STEP.
Option: -starttextstep
Default: 1.2
startfillstyle (StartFillStyle): Set the initial value (-1 to 21) of FILL STYLE.
Option: -startfillstyle
Default: -1 (None)
startgridmode (StartGridMode): Set the initial value (0 to 4) of GRID MODE.
Option: -startgridmode
Default: 0 (None)
startposnmode (StartPosnMode): Set the initial value (0 to 5) of POINT POSITION.
Option: -startposnmode
Default: 1 (1/16inch, or 1mm)
startlinewidth (StartLineWidth): Set the initial value of LINE WIDTH.
Option: -startlinewidth
Default: 1
userscale (UserScale): Set the multiplier used when displaying dimensions.
Option: -userscale
Default: 1.0
userunit (UserUnit): Set the unit name used when displaying dimensions.
Option: -userunit
Default: in (or cm)
zoom (Zoom): Set the initial value of ZOOM SCALE.
Option: -zoom
Default: 1.0

PRINT and EXPORT Resources

export_margin (Width): Set the size of the border margin around the figure for exporting to bitmap, PostScript, Encapsulated PostScript, or HTML MAP formats. This is in units of pixels (1/80th inch).
Option: -export_margin
Default: 0
exportLanguage (ExportLanguage): Set the initial export Language when Exporting.
Option: -exportLanguage
Default: eps (Encapsulated PostScript)
flushleft (FlushLeft): Set the initial Justification when Exporting or Printing.
Option: -flushleft
Default: off (Centered)
magnification (Magnification): Set the initial Magnification when Exporting or Printing.
Option: -magnification
Default: 100
multiple (Multiple): Set the initial selection of Pages when Exporting or Printing.
Option: -multiple
Default: off
paper_size (Papersize): Set the initial Paper Size when Exporting or Printing.; Option: -paper_size
Default: Letter (when unit is inches), or A4 (when unit is cm)
jpeg_quality quality (Quality): Set the quality used when Exporting to the JPEG (JFIF) image format.
Option: jpeg_quality
Default: 75
transparent xfig color number (Transparent): Set the ``transparent'' color when Exporting to the GIF image format. This is one of the xfig colors, which are numbered from -3 (Background), -2 (None), -1 (Default), 0 (Black), 1 (Blue) etc. See Colors.
Option: -transparent_color
Default: -2 (None)

Resources for Fonts or Colors, etc.

boldFont (Font): Set the font to use for file names or confirmation messages, etc.
Option: -bold
Default: 8x13bold
buttonFont (Font): Set the font to use for the labels of most buttons.
Option: -button
Default: 6x13
normalFont (Font): Set the font used in message windows, etc.
Option: -normal
Default: 6x13
scalablefonts (ScalableFonts): Setting this ON will allow use of the X11R5 or OpenWindows scalable fonts.
Option: -scalablefonts
Default: on
canvasbackground (Background): Set the background color of the canvas.
Option: -cbg
Default: ivory
canvasforeground (Foreground): Set the default color of objects.
Option: -cfg
Default: black
monochrome (Monochrome): Setting this ON will make xfig use black and white only for display.
Option: -monochrome
Default: off
dont_switch_cmap (Dont_switch_cmap): Setting this ON will inhibit switching to a private colormap even if not enough colors are available in the default colormap.
Option: -dontswitchcmap
Default: off
visual (Visual): Use visualname as visual.
Option: -visual
Default: default screen visual
depth (Depth): Set depth of the visual.
Option: -depth
Default: default screen depth

Resources for the Size of Windows, etc.

pheight (Height): Set the height of the canvas.
Option: -pheight
Default: 8.5 (inches) (9 inches in portrait mode)
pwidth (Width): Set the width of the canvas.
Option: -pwidth
Default: 11 (inches) (8.5 inches in portrait mode)
but_per_row (But_per_row): Specify the number of buttons wide the mode panel should be.
Option: -but_per_row
Default: 2
justify (Justify): If this is ON, drawing and editing mode panel will put to the right of the canvas.
Option: -left, -right
Default: off (left)
showallbuttons (ShowAllButtons): If this is ON, xfig will always show all the attribute buttons instead of only those relevant to the current drawing mode.
Option: -showallbuttons
Default: off
internalborderwidth (InternalBorderWidth): Set the width of lines between all buttons and panels.
Option: -internalBW
Default: 2 (pixels)
rulerthick (RulerThick): Set the thickness of top and side rulers.
Option: -rulerthick
Default: 24 (pixels)
Minimum: 24

Other Resources

balloon_delay (Balloon_Delay): Specify the delay time in milliseconds before the information balloons popup.
Option: -balloon_delay
Default: 500 milliseconds
browser (Browser): Specify the web browser to use to view the HTML help files.
Default: netscape -remote 'openFile(%f)' || netscape %f
debug (Debug): Setting this ON will turn on debugging mode.
Option: -debug
Default: off
flipvisualhints (Hints): Setting this ON will flip the left/right mouse indicator messages for mice whose buttons have been switched.
Option: -flipvisualhints
Default: off
image_editor (ImageEditor): Specify the program to be invoked when the Edit Image button on the Edit Panel for PICTURE object is clicked.
Option: -image_editor
Default: xv
keyFile (KeyFile): Specify the file to be used as the compose key (international characters) database.
Option: -keyFile
Default: $XFIGLIBDIR/CompKeyDB
(where $XFIGLIBDIR is the variable in the Imakefile for xfig)
library_dir (libraryDirectory): Specify the directory where Fig object directories are stored. When the Library button is pressed this path will be parsed for Fig files and sub-directories. Each sub-directory found will be used as an object library and will appear in the pull-down menu in the library popup panel.
Option: -library_dir
Default: ~/xfiglib
max_image_colors (Max_image_colors): Limit the number of colors used for imported images.
Option: -max_image_colors
Default: 64
pageborder color (Color): Draw the page border on the canvas in this color. The page border is turned on by the -showpageborder option (resource Fig.showpageborder), and shows the edges of the current export paper size.
Option: -pageborder
Default: light blue
pdfviewer (Viewer): Specify the external program to use to view the PDF help files.
Default: acroread %f
showballoons (showBalloons): Popup popup balloon messages when the cursor passes over buttons etc.
Option: -showballoons / -dontshowballoons
Default: on (show balloons)
showdepthmanager (Hints): Show the depth manager to the right of the side ruler.
Option: -showdepthmanager / -hidedepthmanager
Default: on (show depth manager)
showlengths (Debug): Makes xfig show the lengths of lines being drawn, in red text near the line itself. Also, when points are moved or added. In addition, imagine a triangle formed with the line segment as the hypotenuse, and a vertical and horizontal line forming the other two sides. These lines and their lengths are also drawn in red as the point is moved or added.
Option: -showlengths / -dontshowlengths
Default: off
shownums (Debug): Makes xfig show the number of each vertex of objects on the canvas. This is probably only useful for debugging of Fig files.
Option: -shownums, -dontshownums
Default: off (don't show numbers)
showpageborder (Debug): Makes xfig show the border of the current export paper size in the color specified by the -pageborder option (resource Fig.pageborder).
Option: -showpageborder
Default: on
spellcheckcommand (spellCheckCommand): Specify the external spell check program to use when checking spelling of text objects.
Option: -spellcheckcommand
Default: spell
spinner_delay (spinnerDelay): Specify the delay time in milliseconds before a spinner counts automatically, while the up- or down-arrow is being pressed.
Option: -spinner_delay
Default: 500 milliseconds
spinner_rate (spinnerRate): Specify the rate in milliseconds at which a spinner counts automatically.
Option: -spinner_rate
Default: 100 milliseconds
trackCursor (Track): Setting this ON will turn on cursor (mouse) tracking arrows.
Option: -track and -notrack
Default: on
Fig*browse_panel*mask*string: Set the initial value of Filename Mask of Browse Panel. There may be multiple wildcard strings separated by blanks or tabs
Default: *.gif* *.jpg* *.pcx* *.xpm* *.xbm* *.ps* *.eps*
Fig*file_panel*mask*string: Set the initial value of Filename Mask of File Panel. There may be multiple wildcard strings separated by blanks or tabs
Default: *.fig *.fig.gz *.fig.[Zz]
(this will match compressed, gzipped and normal .fig files)
Fig*job_params*string: Set the initial value of Print Job Params of Print Panel. This resource may be used to set any options which should given to lpr (lp on System V system) when printing.
Default: ""
Fig*printer*string: Set the initial value of PostScript Printer of Print Panel. If this resource is not set and the environment variable $PRINTER is set, it is used as the initial value.
Default: ""

Resources for Internationalization

These resources are effective only for xfig with internationalization facility (I18N Imakefile variable enabled).

international (International): Set if the internationalization facility should be enabled.
Option: -international
Default: off
fontMenuLanguage (Language): Specify the language to be used for label of TEXT FONT. japanese and korean are supported in the current release, and label of Times-Roman and Times-Bold will be replaced by those for the language. Normally, you don't have to set this because xfig will choose it from the locale if this is not explicitly specified. This is effective only if internationalization facility is enabled.
Default: ""
eucEncoding: If this is ON, it is assumed that EUC encoding is used for international text. Normally, EUC should be used. This is effective only if internationalization facility is enabled.
Default: on
latinKeyboard (LatinKeyboard): If this is set ON, xfig will accept input via input-method even if a font other than Times-Roman and Times-Bold is selected in TEXT FONT. This may be useful when European keyboard which can enter Latin-1 characters is used, for example.
Default: off
fixedFontSet (FontSet): Set the fontset used for displaying text in conversion or status when entering text with Off the Spot or Over the Spot. This is effective only if internationalization facility is enabled.
Default: -*-times-medium-r-normal--16-*-*-*-*-*-*-*, -*-*-medium-r-normal--16-*-*-*-*-*-*-*, -*-*-*-r-*--16-*-*-*-*-*-*-*
normalFontSet (NormalFontSet): Set the fontset used for drawing international text when Times-Roman is selected. This is effective only if internationalization facility is enabled. See also boldFontSet.
Default: -*-times-medium-r-normal--16-*-*-*-*-*-*-*, -*-*-medium-r-normal--16-*-*-*-*-*-*-*, -*-*-*-r-*--16-*-*-*-*-*-*-*
boldFontSet (BoldFontSet): Set the fontset used for drawing international text when Times-Bold is selected. This is effective only if internationalization facility is enabled. See also normalFontSet.
Default: -*-times-bold-r-normal--16-*-*-*-*-*-*-*, -*-*-bold-r-normal--16-*-*-*-*-*-*-*, -*-*-*-r-*--16-*-*-*-*-*-*-*
inputStyle: Set the input style when entering international text with input method. The style may be selected from OffTheSpot, OverTheSpot, and Root. If this is set to None, input method will not used. This is effective only if internationalization facility is enabled.
Option: -inputStyle
Default: OffTheSpot
fig2devLocalizeOption: Specify the option to be added when invoking fig2dev. This is effective only if internationalization facility is enabled, and the string will added as an option when invoking fig2dev.
Default: -j

Environment Variables

XFIGTMPDIR: Specify the directory where temporary files should stored. If this is not set, the /tmp directory will be used.
PRINTER: Specify the default printer when printing figures with Print. If the Fig*printer*string resource is set, this variable will ignored.
LANG: Set the language to be used. For Japanese, a locale name like japanese or ja_JP.eucJP may be used.
XMODIFIERS: Specify the input method to be used for entering text. If this is not set, the default input method will be used.
FIG2DEV_LIBDIR: Specify the directory where the files needed by international-fig2dev (japanese.ps, etc.) are placed. If this is not set, the setting when compiling fig2dev will be used.

[ Contents | Introduction | Credits ]